Kingstar M10
Card found: S/N : 231B56EF , v0136
Chinese Miracle II [SPD module] v 1.27
Set mode to : SPD6610_ALCATEL
Set mode to : SPD6531
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : Kingstar
Model Name : M10
ExtInfo Data : Bangla
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_Bangla__Kingstar-M10.bin
Done!
Elapsed: 00:00:44
Reconnect Power/Cable!
Operation : Flash [ v1.27 ]
======= Flash
Files set for flashing :
[ MCU ] : SPD6531_00400000_GD25LQ32_Bangla__Kingstar-M10.bin
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Device boot not done
Check Drivers
Try again
Reconnect Power/Cable!
Operation : Flash [ v1.27 ]
======= Flash
Files set for flashing :
[ MCU ] : SPD6531_00400000_GD25LQ32_Bangla__Kingstar-M10.bin
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
======= Flashing MCU
Mapping file ...
Mapping done
Processing file : SPD6531_00400000_GD25LQ32_Bangla__Kingstar-M10.bin
Init ok, send data
Flashing Done!
Info : In some cases after flash required make "Format Fs / Reset Phone"
Done!
Elapsed: 00:01:05
Reconnect Power/Cable!
